Safety Tips to Prevent Commercial Electric Fires

In Commercial buildings, electricity typically enters through an electrical distribution system which varies in size and complexity depending on the operation of the business. This system is usually comprised of a network of circuits that include wiring, circuit breakers, fuses and additional step-down transformers for the low voltage equipment. So, the complex components that are involved in the electrical systems can expose your commercial building to fire risks.

Electrical fires consistently ranked No. 1 among the leading causes of commercial and residential fires which are often resulting in death, injury and significant property loss to your business. Electric current occurs when there is more amperage run across an electric circuit or outlet that the system can handle. Due to the increased electricity, the wire and circuit breakers can get excess heat which probably increases the risk of fire or short circuit. Certain problems are common in commercial buildings; fortunately, there are some warning signs and solutions to prevent such electrical fires…

Warning Signs

  • Frequently blown fuses or tripped circuits
  • Worn or discoloured wall outlets
  • Frequently flickering or dimming lights
  • Getting a shock

Hire a Qualified Electrician for Electrical Work

Qualified electricians in Sydney are trained to install all electrical wires and outlets to meet your building codes and standards. They will make sure that all the fixtures in your building are installed properly and if any problem occurs they can able to identify the faulty outlet from the miles away.

Do Not Use the Same Outlet

Electronic devices or equipment with high energy loads can easily overload a commercial outlet, especially while using the same outlet for more than one device. High energy equipment should have its own dedicated outlet, for your safety.

Eliminate Extension cords

If multiple devices are plugged into the same outlet through an extension cord, the risk of over current increases. Extension cords often provide a temporary solutions and it should not be used as a substitute for the fixed wiring of a device. If the extension cord is a permanent fixture in your office setup, definitely you should look for the other solution.

Blown Fuses and Tripped Circuits Indicates the Problem

Usually overloaded outlets or circuits may cause frequent blown fuses or tripped circuits are the main indications of electrical problems.

Also, a frequent flickering or dimming lights may indicate a short in the wiring, dangerous arcing, or an overextension of electrical systems.

Consult a licensed commercial electrician in Sydney for assistance.

Practice Preventative Maintenance

Within your electric system, loose and corroded wires connections can trip breakers, overload and damage the sensitive equipment. Regular maintenance of both electric system and the cords connecting to it helps you to reduce these risks.

By using these preventive steps and solutions, you can minimise the chance of an electrical hazard and potential loss in your commercial building, but it’s still important to hire an experienced electrician in Sydney for safe and stress-free life.

Comments for this post are closed.